HONEYWELLR4343E1014 火焰继电器-产品资讯-欧美工业品直购官网

霍尼韦尔（HONEYWELL）是一家《财富》美国100强之一的互联工业企业，为全球客户提供专业的行业解决方案，涵盖航空和汽车产品及服务，楼宇、住宅和工业控制技术，以及特性材料。从飞机、汽车、住宅、楼宇、制造工厂、供应链到工人，HONEYWELL的技术致力于万物互联，创造一个更智能、更安全和更可持续发展的世界。

HONEYWELL的主要产品有：传感器，继电器，电机，行程开关，限位开关，压力开关，温控仪，点火控制器，变压器，模块，放大器，阀，火焰探测器，执行器等。

HONEYWELL火焰继电器R4343E1014规格描述

Approvals	CE approved according EN298 (for intermittent operation)
Protection class	IP40
Ambient temperature	-10 ... 60 oC
Maximum humidity	90 %rh
Note	The R4343D models will operate also with the "Satronic" IRD820/1020 range of infrared sensors. Note that this combination is NOT CE approved for use on installations that fall under the GAD (Gas Appliances Directive).
Outputs	1xDPDT
Operation	Intermit.
Additional description	R4343D models are for use with rectification type flame sensors, such as flame rods and C7012A/G UV sensors. R4343E models are for use with Honeywell UV sensor models C7027, C7035 and C7044.

HONEYWELL火焰继电器R4343E1014产品介绍

The R4343D/E series is a flame switch for intermittent operation to indicate presence or absence of a flame and to be applied in commercial or industrial burner installations. light.

• Flame current meter jack socket on the front permits monitoring of flame signal strength, by using any appropriate microampere meter (0-10uA minimum scale).

• Plug-in mounts onto a sub base (included) for surface mounting. Providing an indication of absense or presence of a flame in intermittent industrial oil/gas burner applications by an open or closed relay contact.

Approvals:CE approved according EN298 (for intermittent operation)

Protection class:IP40

Ambient temperature:-10 ... 60 oC

Maximum humidity:90 %rh

Note:The R4343D models will operate also with the "Satronic" IRD820/1020 range of infrared sensors. Note that this combination is NOT CE approved for use on installations that fall under the GAD (Gas Appliances Directive).

Outputs:xDPDT

Operation:Intermit.

Additional description:R4343D models are for use with rectification type flame sensors, such as flame rods and C7012A/G UV sensors. R4343E models are for use with Honeywell UV sensor models C7027, C7035 and C7044.

R4343D / E系列是用于间歇运行的火焰开关，用于指示是否存在火焰，并用于商业或工业燃烧器安装。光。

•前面的火焰电流计插孔可通过使用任何合适的微安表（0-10uA最小刻度）监视火焰信号强度。

•插入式安装到子基座（随附）上以进行表面安装。通过断开或闭合的继电器触点来指示间歇性工业油气燃烧器应用中是否存在火焰。

认证：CE通过EN298认证（适用于间歇运行）

防护等级：IP40

环境温度：-10 ... 60 oC

最高湿度：90％rh

注意：R4343D型号也可与“ Satronic” IRD820 / 1020系列红外传感器一起使用。请注意，此组合未经CE批准可用于GAD（燃气具指令）下的安装。

输出：xDPDT

操作：间歇。

附加说明：R4343D模型用于整流型火焰传感器，例如火焰棒和C7012A / G UV传感器。 R4343E模型与霍尼韦尔C7027，C7035和C7044紫外线传感器一起使用。

HONEYWELL火焰继电器型号：

HONEYWELL R4343E1006

HONEYWELL R4343E1014

HONEYWELL R4343E1048-ST005

HONEYWELL Flame relay NEW + ORIGINAL+ ONE YEAR WARRANTY

/ .

HONEYWELL火焰继电器R4343E1014技术数据

声明：本站文章来源于网上转载，观点仅代表作者本人，不代表本站立场。如有侵权或者其他问题，请联系举报。

上一条：HANNAHI76303 电导率探头下一条：HONEYWELLC7035A1064/U 火焰检测器

HONEYWELLR4343E1014 火焰继电器

文章推荐

产品资讯

热门资讯

联系询价