HOSCORYA-6 接头-产品资讯-欧美工业品直购官网

HOSCO接头RYA-6产品参数

Specification
Part Number	T(F)	T1(M)
RYA-6	3/8 NPS	3/8 NPS
RYA-6B	3/8 BSP	3/8 BSP
RYA-4	3/8 NPS	3/8 NPS
RYA-4B	3/8 BSP	3/8 BSP

HOSCO接头RYA-6产品介绍

Hosco不锈钢限流器为喷头提供可靠，长寿命的流体流量控制。该产品系列包括循环和非循环版本，即使在点胶时也可以内部设置（防篡改）或从外部进行调节。限流器的长锥形针头设计提供了从完全关闭到超过1000 cc / min（取决于压力和粘度）的精细流量调节。从限流器到限流器站的设置是可重复的，因此设置相对容易。内部设置样式可能需要RAB-6工具在限流器“在线”时提供初始设置点调整。外部调整的版本需要使用限流器随附的内六角扳手进行调整。

所有内部限流器的最大扭矩规格

不超过22 nm或194英寸磅。或16英尺磅

Hosco Stainless Steel Restrictors provide reliable, long life fluid flow control to an applicator. The family of products consists of recirculating and non-circulating versions that can be internally set (tamperproof) or externally adjusted even while dispensing. The long tapered needle design of the restrictors provide fine flow rate adjustments from complete shut off to over 1000 cc/min (depending on pressure and viscosity). Settings are repeatable from restrictor to restrictor station so set up is relatively easy. The internally set styles may require the RAB-6 Tool to provide initial set point adjustment while the restrictor is “on line”. The externally adjusted versions require an allen wrench for adjustment which is included with the restrictor.

Maximum Torque Specification for all internal restrictors

Not to exceed 22 nm or 194” lbs. or 16 ft lbs.

HOSCO接头RYA-6其他常见型号：

HOSCO RIA-6B

HOSCO RYA-6

HOSCO RIA-6

HOSCO RYA-4

HOSCO RYA-4B

HOSCO RY-4

HOSCO RY-4B

HOSCO RY-6

HOSCO RY-6B

HOSCO Restrictors NEW + ORIGINAL+ ONE YEAR WARRANTY

/ :.

HOSCO接头RYA-6产品参数

声明：本站文章来源于网上转载，观点仅代表作者本人，不代表本站立场。如有侵权或者其他问题，请联系举报。

上一条：FINGERSAVERFingersaver 3G-Standard(375mm) 手指保护器下一条：INTREPIDUDG-37 安全门

HOSCORYA-6 接头

文章推荐

产品资讯

热门资讯

联系询价